Quick Answer: What Is Primary Triangulation?

What is triangulation in narcissism?

In the context of narcissism, triangulation occurs when the narcissist attempts to control the flow, interpretation, and nuances of communication between two separate actors or groups of actors.

Ensuring communications flow through, and constantly relate back to the narcissist provides a feeling of importance..

What are base lines?

1 : a line serving as a basis especially : one of known measure or position used (as in surveying or navigation) to calculate or locate something. 2a : either of the lines on a baseball field that lead from home plate to first base and third base and are extended into the outfield as foul lines.

What is base line measurement?

The term baseline measurement can refer to a measurement of any problem—be it a child’s behavior problems or a social ill in one’s community. In terms of a child who’s acting out, however, a baseline measurement refers to the beginning measurement of a behavior.

What is meant by triangulation?

Definition of ‘triangulation’ 1. a method of surveying in which an area is divided into triangles, one side (the base line) and all angles of which are measured and the lengths of the other lines calculated trigonometrically. 2. the network of triangles so formed.

In which of the following areas the usage of primary triangulation is done?

In which of the following areas, the usage of primary triangulation is done? Explanation: Due to its high accuracy and high order presence, the primary triangulation is adopted for important works like measuring the earth’s figure and also for other government related works.

What is base net in surveying?

[′bās ¦net] (engineering) A system, in surveying, of quadrilaterals and triangles that include and are quite close to a base line in a triangulation system.

What are the four types of triangulation?

In 1978, Norman Denzin identified four basic types of triangulation: (1) data triangulation: the use of multiple data sources in a single study; (2) investigator triangulation: the use of multiple investigators/research- ers to study a particular phenomenon; (3) theory triangulation: the use of multiple perspectives to …

What is the goal of triangulation technique?

Triangulation refers to the use of multiple methods or data sources in qualitative research to develop a comprehensive understanding of phenomena (Patton, 1999). Triangulation also has been viewed as a qualitative research strategy to test validity through the convergence of information from different sources.

What is the difference between a valley and a ridge?

Ridge (Also: Arete or Spur) – A continuous elevated terrain with sloping sides. … A valley can be “V” or “U” shaped and often can be seen as a “negative” to a ridge. On a map, valleys are represented by the same contour shape as ridges with the difference being the the wide openings are at lower elevation.

What is triangulation and Trilateration?

It’s already explained in the terms: Triangulation = working with angles. Trilateration = working with distances. In real world applications you often work with both, or combine them. For example, total station surveys measure both distances and angles.

What are the disadvantages of quantitative method?

Disadvantages of Quantitative ResearchFalse focus on numbers. Quantitative research can be limited in its pursuit of concrete, statistical relationships, which can lead to researchers overlooking broader themes and relationships. … Difficulty setting up a research model. … Can be misleading.

What is the basic principle of triangulation?

In surveying, triangulation is the process of determining the location of a point by measuring only angles to it from known points at either end of a fixed baseline, rather than measuring distances to the point directly as in trilateration.

What is an example of triangulation?

There are four common forms of triangulation: (1) data triangulation means that the ethnographer uses a variety of data sources for the study, for example, a range of different informants; (2) method triangulation means the use of multiple methods in the same project (Janesick, 1998), for example, interviews and …

Which of the following is the most important process in the triangulation system?

Which of the following is the most important process in the triangulation system? … Explanation: In the triangulation system, base line will have the at most importance. It will be the key factor of the classification, as it describes the accuracy of the work.

What are 3 types of contour lines?

There are 3 kinds of contour lines you’ll see on a map: intermediate, index, and supplementary.Index lines are the thickest contour lines and are usually labeled with a number at one point along the line. … Intermediate lines are the thinner, more common, lines between the index lines.More items…

What is triangulation and why is it important?

Triangulation facilitates validation of data through cross verification from more than two sources. It tests the consistency of findings obtained through different instruments and increases the chance to control, or at least assess, some of the threats or multiple causes influencing our results.

Is a line lying in a level surface?

Explanation: A level line is a line lying in a level surface. It is, therefore, normal to the plumb line, at all points. … Explanation: Horizontal plane through a point is a plane tangential to the level surface at that point. It is, therefore, perpendicular to the plumb line through the point.

What is emotional triangulation?

Triangulation occurs when an outside person intervenes or is drawn into a conflicted or stressful relationship in an attempt to ease tension and facilitate communication. This situation is often seen in family therapy.

Which geometrical figure is used in triangulation surveying?

Triangulation surveying is the tracing and measurement of a series or network of triangles to determine distances and relative positions of points spread over an area, by measuring the length of one side of each triangle and deducing its angles and length of other two sides by observation from this baseline.

How Triangulation is different from traversing?

is that triangulation is (uncountable) a technique in surveying in which distances and directions are estimated from an accurately measured baseline and the principles of trigonometry while traverse is (climbing) a route used in mountaineering, specifically rock climbing, in which the descent occurs by a different …

What is the most common type of triangulation?

Data Triangulation Data triangulation involves using different sources of information in order to increase the validity of a study. This type of triangulation, where the researchers use different sources, is perhaps the most popular because it is the easiest to implement.

Which shaped lines indicate the presence of a ridge?

Which shaped lines indicate the presence of a ridge? Explanation: The contour line with U-shape, which has convexity towards a lower ground shows the presence of a ridge.

What is triangulation method in surveying?

Triangulation is a surveying method that measures the angles in a triangle formed by three survey control points. Using trigonometry and the measured length of just one side, the other distances in the triangle are calculated.

What is the purpose of traversing?

The purpose of traverse is to locate the unknown points relative to each other and to locate all points within the traverse relative to a common grid. Three elements of starting data are needed. They are the coordinates and height of a starting point and an azimuth to a visible azimuth mark.

What are the methods used for measuring the baseline?

The measurement of baseline was in the past century carried out by instruments such as tapes, chains bands before the advent of Electromagnetic Distance Measuring Instrument (EDM). Distance measurements by electromagnetic means have virtually replaced the method of measuring baseline using the early instruments.